How To Set Tabs In Word 2007

(Athenaeum) Microsoft Word 2007: Setting Tabs Mac

Terminal updated Monday, Aug. 31, 2022, at 10:36 a.thou.

This article is based on legacy software.

Tabs let you to position text exactly where yous would like it. To avoid problems with text alignment, use tabs rather than spaces. The default tab settings for Microsoft Discussion are every half-inch. If you practice not like the Word settings, you tin can set your own tabs.

Tab Types

Tabs come up in different types which are defined by the mode text aligns with the tab. The following table explains the dissimilar tab types.

Tab Type	Icon	Purpose
Left (Normal)		With the Left tab, text will brainstorm at the tab position and proceed to the correct of the tab.
Right		With the Right tab, text volition finish at the tab and flow to the left.
Center		The Heart tab works similar to centering a line of text but instead of centering betwixt margins, text is centered at the tab location.
Decimal		The Decimal tab is used to marshal numbers and text with a menstruation. This is useful for a grouping of numbers or a listing of instructions.
Bar		The Bar tab is used to add a vertical line at that position. This could be used when you want to set off some text.

Setting a tab does not automatically marshal your text. You still take to press [Tab] at the appropriate places.

Working with Tabs from the Ruler

Working with tabs using the Ruler option is a quick and easy way to fix and adjust tabs. The Ruler options allow you to gear up, move, delete, or change tabs.

Working with Tabs from the Ruler: Setting Tabs

1. Select the paragraph(s) that volition receive new tab settings

2. Click the TAB Type icon
   The Tab Type pull-downwardly menu appears.

   NOTE: For definitions of the different tab types, refer to Tab Types to a higher place.

   

3. Select the desired tab type

4. On the Ruler, click where you want the tab

   NOTE: Be sure to click beneath any numbers or dash marks.

Working with Tabs from the Ruler: Changing Tab Type

To motility a tab, click and drag it to the desired position on the ruler.
To modify the tab type, yous tin can either delete the tab and add a new tab of the correct type or you can utilise the Tabs dialog box.

Working with Tabs from the Tabs Dialog Box

The Tabs dialog box allows yous to adjust the placement and type of tab. Although the Ruler selection is a quicker way to adjust tabs, the dialog box allows you to use leaders and enter specific tab locations.

In the Tabs dialog box, you lot can ready leaders for the tabs. Leaders are lines (solid, dashed, or dotted) that announced in the blank space created by a tab. The most common use for a leader is in a table of contents where a dotted line leads upwards to the folio number. Leaders guide the reader's heart across the page.

To access the Tabs dialog box

1. Select the paragraph(s) that volition receive new tab settings

2. Click the TAB TYPE icon
   The Tab Type pull-down menu appears.

3. Select Tabs ...
   The Tabs dialog box appears.
   
   

Working with Tabs from the Tabs Dialog Box: Setting Tabs

1. Access the Tabs dialog box

2. In the Tab stop position text box, type the desired value (in inches)

3. In the Alignment section, select the desired alignment

4. (Optional) In the Leader department, select the desired leader

5. Click Fix

6. To fix additional tabs, echo steps 2-5

7. After all tabs have been set, click OK

Working with Tabs from the Tabs Dialog Box: Moving Tabs

Moving tabs in the Tabs dialog box involves adding a new tab and deleting the old ane.

1. Access the Tabs dialog box

2. In the Tab stop position roll box, select the desired tab

3. Click CLEAR

4. In the Tab stop position text box, type the new tab location

5. Arrange the tab alignment and leader if necessary

6. Click Prepare

7. Click OK

Working with Tabs from the Tabs Dialog Box: Deleting Tabs

1. Identify the insertion point inside the paragraph with the tab settings you want to delete

2. Access the Tabs dialog box

3. From the Tab stop position scroll box, select the tab to be deleted

4. Click CLEAR
   HINT: To delete all tabs, click CLEAR ALL

5. To delete other tabs, echo steps iii-4

6. Click OK

Working with Tabs from the Tabs Dialog Box: Changing Tab Blazon

1. Select the desired paragraph(s) whose tab settings you want to change

2. Access the Tabs dialog box

3. From the Tab cease position scroll box, select the tab to be inverse

4. In the Alignment section, select the new tab type

   Annotation: Depending on the text alignment, the tab position may demand to exist adjusted. For more information, refer to Moving Tabs above.

5. Click Set

6. To modify other tabs, echo steps 3-5

7. Click OK

Was this article helpful? Yes No

View / Impress PDF

Source: https://www.uwec.edu/kb/article/microsoft-word-2007-setting-tabs-mac/

Share this post